The ’ACT174 devices are positive-edge-triggered D-type flip-flops with a direct clear (CLR)\ input and are designed for 4.5-V to 5.5-V VCC operation.

Information at the data (D) inputs that meets the setup time requirements is transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going edge of CLK. When CLK is at either the high or low level, the D input has no effect at the output.

• Inputs Are TTL-Voltage Compatible
• Contain Six Flip-Flops With Single-Rail Outputs
• Buffered Inputs
• Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption
• Balanced Propagation Delays
• ±24-mA Output Drive Current
  • Fanout to 15 F Devices
• SCR-Latchup-Resistant CMOS Process and Circuit Design
• Exceeds 2-kV ESD Protection Per MIL-STD-883, Method 3015
• Applications Include:
  • Buffer/Storage Registers
  • Shift Registers

• TPS3823-30 - 具有看门狗输入和手动复位功能的电源电压监控器
• SN74ALS688 - 8 位等值比较器
• SN74AC86 - 四路 2 输入异或门
• SN54LS378 - 具有使能端的六路 D 类触发器
• ADC78H90 - 8 通道、500 KSPS、12 位 A/D 转换器
• UC1845A-EP - 增强型产品电流模式 Pwm 控制器
• TLV5624 - 8 位 1.0 至 3.5us DAC，具有串行输入、可编程内部参考和稳定时间
• LMT84 - 具有 AB 类输出的 LMT84 - 1.5V、SC70、多增益模拟温度传感器
• TPA2012D2 - 2.1W 立体声 D 类音频功率放大器
• LMZ21700 - 具有 17V 最大输入电压的 LMZ21700 1A SIMPLE SWITCHER? 纳米模块