

- 5962-9093801M2A - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS74801RGWRM3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TAS6422QDKQRQ1 - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TMS470R1A288PGETR - 集成电路(IC) > 嵌入式 > 微控制器
- OPA2695ID - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- BQ3050DBTR - 集成电路(IC) > 电源管理(PMIC) > 电池管理
- THS4082EVM - 开发板,套件,编程器 > 评估板 > 运算放大器评估板
- OPA171AQDBVRQ1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74LV245ADGVR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM350K STEEL/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DLP4500FQE - 集成电路(IC) > 专用 IC
- LMV791MK/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- UA9637ACPSRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TPS70925DRVT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74LVC1G123DCTT - 集成电路(IC) > 逻辑 > 多谐振荡器
- OPA835IRUNT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74LV138APWRG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- CDCVF855PWG4 - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- TPS76801QPWPRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP2967IBP-2833/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性



CD74HC423 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器
CD74HC423是TI德州仪器公司的一款单稳多频振荡器产品,CD74HC423是具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器,本站介绍了CD74HC423的封装应用图解、特点和优点、功能等,并给出了与CD74HC423相关的TI元器件型号供参考。
CD74HC423 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器 - 单稳多频振荡器 - 特殊逻辑 - 德州仪器
The HC123, HCT123, CD74HC423 and CD74HCT423 are dual monostable multivibrators with resets. They are all retriggerable and differ only in that the 123 types can be triggered by a negative to positive reset pulse; whereas the 423 types do not have this feature. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adjustment of Rx and CX provides a wide range of output pulse widths from the Q and Q\ terminals. Pulse triggering on the A\ and B inputs occur at a particular voltage level and is not related to the rise and fall times of the trigger pulses.
Once triggered, the output pulse width may be extended by retriggering inputs A\ and B. The output pulse can be terminated by a LOW level on the Reset (R) pin. Trailing edge triggering (A)\ and leading edge triggering (B) inputs are provided for triggering from either edge of the input pulse. If either Mono is not used each input on the unused device (A\, B, and R\) must be terminated high or low.
The minimum value of external resistance, Rx is typically 5k. The minimum value external capacitance, CX, is 0pF. The calculation for the pulse width is tW = 0.45 RXCX at VCC = 5V.
- Overriding Reset Terminates Output Pulse
- Triggering From the Leading or Trailing Edge
- Q and Q\ Buffered Outputs
- Separate Resets
- Wide Range of Output-Pulse Widths
- Schmitt Trigger on Both A\ and B Inputs
- Fanout (Over Temperature Range)
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
- Wide Operating Temperature Range . . . 55°C to 125°C
- Balanced Propagation Delay and Transition Times
- Significant Power Reduction Compared to LSTTL Logic ICs
- HC Types
- 2V to 6V Operation
- High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V
- HCT Types
- 4.5V to 5.5V Operation
- Direct LSTTL Input Logic Compatibility, VIL = 0.8V (Max), VIH = 2V (Min)
- CMOS Input Compatibility, Il 1µA at VOL, VOH
- UCC27211 - 120V 升压 4A 峰值电流的高频高侧/低侧驱动器
- ADS4245 - 14 位 125MSPS 双路低功耗 ADC
- SN75160B - 八路通用接口总线收发器
- TMP435 - 具有自动 β、N 因数和串联电阻校正的 ±1°C 远程和本地温度传感器
- INA213A-Q1 - 汽车级、26V、双向、零漂移、低侧/高侧、电压输出电流感测放大器
- TXS0104E - 用于漏极开路应用的 4 位双向电压电平转换器
- DAC7811 - 12 位串行输入乘法数模转换器
- SN74AVCBH324245 - 具有可配置电压转换和 3 态输出的 32 位双电源总线收发器
- MSP430G2452 - MSP430G2x52、MSP430G2x12 混合信号微处理器
- CSD16323Q3C - 双路 Cool N 通道 NexFET 功率 MOSFET



