• Input Voltage Range: 2.8 V to 5.5 V
• Compatible with Advanced Applications Processors and FPGAs
• 2 LDOs for Powering Internal Processor Functions and I/Os
• High-Speed Serial Interface for Independent Control of Device Functions and Settings
• Precision Internal Reference
• Thermal Overload Protection
• Current Overload Protection
• Software Programmable Regulators
• External Power-On-Reset Function for Buck1 and Buck2 (Power Good with Delay Function)
• Undervoltage Lockout Detector to Monitor Input Supply Voltage
• Step-Down DC-DC Converter (Buck)
  • Programmable VOUT from:
    • Buck1 : 0.8 V - 2 V at 1 A
    • Buck2 : 1 V - 3.5 V at 600 mA
  • Up to 96% Efficiency
  • 2.1-MHz PWM Switching Frequency
  • PWM-to-PFM Automatic Mode Change Under Low Loads
  • ±3% Output Voltage Accuracy
  • Automatic Soft Start
• Linear Regulators (LDO)
  • Programmable VOUT of 1 V to 3.5 V
  • ±3% Output Voltage Accuracy
  • 300-mA Output Current
  • 30-mV (typical) Dropout

• FPGA, DSP Core Power
• Applications Processors
• Peripheral I/O Power

The LP3907-Q1 is a multi-function, programmable Power Management Unit, optimized for low power FPGAs, microprocessors, and DSPs. This device integrates two highly efficient 1-A/600-mA step-down DC-DC converters with dynamic voltage management (DVM), two 300-mA linear regulators, and a 400-kHz I2C interface to allow a host controller access to the internal control registers of the device. The LP3907-Q1 additionally features programmable power-on sequencing. This device is an Automotive-Grade Product that is AECQ-100 Grade 1 Qualified.

• ADC31JB68 - 单通道 16 位，500Msps 模数转换器
• TPS60123 - 稳压 3.3V 高功率充电泵 DC/DC 转换器
• BQ24079 - USB 供能的 1.2A 锂离子电池充电器和具有 4.1 VBAT 的电源路径管理 IC
• LMH0070 - 具有 LVDS 接口的 SD、DVB-ASI SDI 串行器和驱动器
• SN74LS139A - 双路 2 线路至 4 线路解码器/多路解复用器
• DAC7625 - 12 位四路电压输出数模转换器
• SN74HC27 - 三路 3 输入正或非门
• TS5A22364 - 具有负轨功能的 0.65Ω 双路 SPDT 模拟开关
• TLC7705M - 单电源 SVS (5v)，具有可编程时间延迟及推挽输出
• INA194A-Q1 - 汽车级、-16V 至 +80V、低侧或高侧、高速、电压输出电流分流监控器