NS16C2552 - 具有 16 字节 FIFO 和高达 5 Mbit/s 数据速率的双路 UART

NS16C2552是TI德州仪器公司的一款无产品，NS16C2552是具有 16 字节 FIFO 和高达 5 Mbit/s 数据速率的双路 UART，本站介绍了NS16C2552的封装应用图解、特点和优点、功能等，并给出了与NS16C2552相关的TI元器件型号供参考。

NS16C2552 - 具有 16 字节 FIFO 和高达 5 Mbit/s 数据速率的双路 UART - 无 - UART - 德州仪器

产品描述

The NS16C2552 and NS16C2752 are dual channel Universal Asynchronous Receiver/Transmitter (DUART). The footprint and the functions are compatible to the PC16552D, while new features are added to the UART device. These features include low voltage support, 5V tolerant inputs, enhanced features, enhanced register set, and higher data rate.

The two serial channels are completely independent of each other, except for a common CPU interface and crystal input. On power-up both channels are functionally identical to the PC16552D. Each channel can operate with on-chip transmitter and receiver FIFO’s (in FIFO mode).

In the FIFO mode each channel is capable of buffering 16 bytes (for NS16C2552) or 64 bytes (for NS16C2752) of data in both the transmitter and receiver. The receiver FIFO also has additional 3 bits of error data per location. All FIFO control logic is on-chip to minimize system software overhead and maximize system efficiency.

To improve the CPU processing bandwidth, the data transfers between the DUART and the CPU can be done using DMA controller. Signaling for DMA transfers is done through two pins per channel (TXRDY and RXRDY). The RXRDYfunction is multiplexed on one pin with the OUT2 and BAUDOUT functions. The configuration is through Alternate Function Register.

The fundamental function of the UART is converting between parallel and serial data. Serial-to-parallel conversion is done on the UART receiver and parallel-to-serial conversion is done on the transmitter. The CPU can read the complete status of each channel at any time. Status information reported includes the type and condition of the transfer operations being performed by the DUART, as well as any error conditions (parity, overrun, framing, or break interrupt).

The NS16C2552 and NS16C2752 include one programmable baud rate generator for each channel. Each baud rate generator is capable of dividing the clock input by divisors of 1 to (216 - 1), and producing a 16X clock for driving the internal transmitter logic and for receiver sampling circuitry. The NS16C2552 and NS16C2752 have complete MODEM-control capability, and a processor-interrupt system. The interrupts can be programmed by the user to minimize the processing required to handle the communications link.

产品特性

Dual Independent UART
Up to 5 Mbits/s Data Transfer Rate
2.97 V to 5.50 V Operational Vcc
5 V Tolerant I/Os in the Entire Supply Voltage Range
Industrial Temperature: -40°C to 85°C
Default Registers are Identical to the PC16552D
NS16C2552/NS16C2752 is Pin-to-Pin Compatible to TI PC16552D, EXAR ST16C2552, XR16C2552, XR 16L2552, and Phillips SC16C2552B
NS16C2752 is Compatible to EXAR XR16L2752, and Register Compatible to Phillips SC16C752
Auto Hardware Flow Control (Auto-CTS, Auto-RTS)
Auto Software Flow Control (Xon, Xoff, and Xon-any)
Fully Programmable Character Length (5, 6, 7, or 8) with Even, Odd, or No Parity, Stop Bit
Adds or Deletes Standard Asynchronous Communication Bits (Start, Stop, and Parity) to or from the Serial Data
Independently Controlled and Prioritized Transmit and Receive Interrupts
Complete Line Status Reporting Capabilities
Line Break Generation and Detection
Internal Diagnostic Capabilities
- Loopback Controls for Communications Link Fault Isolation
- Break, Parity, Overrun, Framing Error Detection
Programmable Baud Generators Divide any Input Clock by 1 to (216 - 1) and Generate the 16 X clock
IrDA v1.0 Wireless Infrared Encoder/Decoder
DMA Operation (TXRDY/RXRDY)
Concurrent Write to DUART Internal Register Channels 1 and 2
Multi-Function Output Allows More Package Functions with Fewer I/O Pins
44-PLCC or 48-TQFP Package

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购