PTH12060L是TI公司的一款非隔离式模块产品，PTH12060L是0.8 至 1.8V 10A 输出 12V 输入的非隔离宽调节模块，本页介绍了PTH12060L的产品说明、应用、特性等，并给出了与PTH12060L相关的TI元器件型号供参考。
PTH12060L - 0.8 至 1.8V 10A 输出 12V 输入的非隔离宽调节模块 - 非隔离式模块 - 电源模块 - TI公司（Texas Instruments，德州仪器）
The PTH12060 series is a non-isolatedpower module, and part of a new class of complete dc/dc converters from Texas Instruments. These modules are small in size, and are an alternative for applications requiring up to 10 A of load current.
The small footprint, (1 inch × 0.62 inch) and industry leading features makes this module suitable for space conscious digital systems that incorporate multiple processors.
This series of modules operate from a 12-V input bus voltage to provide step-down power conversion to a wide range of output voltages. The output voltage of the W-suffix device may be set to any voltage over the adjust range, 1.2 V to 5.5 V. The L-suffix device has an adjustment range of 0.8 V to 1.8 V. The output voltage is set within the adjust range using a single external resistor.
This product includes Auto-Track™ Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system, by enabling modules to track each other, or any other external voltage, during power up and power down.
Other features include an on/off inhibit and margin up/down controls. An output voltage sense ensures tight load regulation. Non-latching overcurrent trip protects against load faults.
- Up to 10-A Output Current
- 12-V Input Voltage
- Wide-Output Voltage Adjust(1.2 V to 5.5 V/(0.8 V to 1.8 V)
- Efficiencies up to 95%
- 225 W/in3 Power Density
- Output Voltage Sense
- Margin Up/Down Controls
- Undervoltage Lockout
- Auto-Track Sequencing
- Pre-Bias Start-up Capability using On/Off Inhibit
- Output Overcurrent Protection (Non-latching, Auto-Reset)
- Operating Temperature: -40°C to 85°C
- Safety Agency Approvals: UL/IEC/CSA C22.2 60950-1
- Point-of-Load Alliance (POLA) Compatible
- APPLICATIONS
- Complex Digital
下面可能是您感兴趣的TI公司非隔离式模块元器件
- LP2951 - 单路输出 LDO、100mA、可调节电压、宽输入电压范围、复位标志
- ADC088S052 - 8 通道、200 ksps 至 500 ksps、8 位 A/D 转换器
- BQ294502 - 用于 2 至 3 节锂离子电池的过压保护器件，具有 4.35v OVP
- UCC38503 - BiCMOS PFC/PWM 组合控制器
- PTV12010L - 0.8 至 1.8 V 8A 的 12V 输入非隔离宽调节 SIP 模块
- MSP430F5171 - MSP430F51x2 混合信号微处理器
- CD74HC151 - 高速 CMOS 逻辑 8 输入多路复用器
- UC3176 - 全桥接功率放大器
- TRF3765 - 具有集成式 VCO 和最多 8 个输出的 300M-4800MHz 低噪声整数 N/分数 N PLL
- TPS61251 - 用于电池备份充电的 3.5MHz、1.5A 电流限制、92% 高效升压转换器
- Complex Digital
