SN54BCT374 - 具有三态输出的八路边沿 D 类触发器

SN54BCT374是TI德州仪器公司的一款D类触发器产品，SN54BCT374是具有三态输出的八路边沿 D 类触发器，本站介绍了SN54BCT374的封装应用图解、特点和优点、功能等，并给出了与SN54BCT374相关的TI元器件型号供参考。

SN54BCT374 - 具有三态输出的八路边沿 D 类触发器 - D类触发器 - 触发器/锁存器/寄存器 - 德州仪器

产品描述

These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops of the ’BCT374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. The output-enable (OE)\ input does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

产品特性

Operating Voltage Range of 4.5 V to 5.5 V
State-of-the-Art BiCMOS Design Significantly Reduces ICCZ
Full Parallel Access for Loading
Buffered Control Inputs
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)

下面可能是您感兴趣的TI德州仪器公司D类触发器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购