These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G\) input is at a high logic level.

To ensure the high-impedance state during power up or power down, (G\) should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Wide Operating Voltage Range of 2 V to 6 V
• High-Current Inverting Outputs Drive up to 15 LSTTL Loads
• Low Power Consumption, 80-µA Max ICC
• ’HC257 ...Typical tpd = 9 ns
• ’HC258 ...Typical tpd = 12 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Provides Bus Interface from Multiple Sources in High-Performance Systems

• SN74HC4851-Q1 - 具有注入电流影响控制的汽车类 8 通道模拟多路复用器/多路解复用器
• ADC78H90 - 8 通道、500 KSPS、12 位 A/D 转换器
• AM26C31M - 四路差动线路驱动器，EIA-422A
• DM388 - DM385/DM388 DaVinci 数字媒体处理器（内部）
• TPS65560 - 集成的闪光灯充电器和 IGBT 驱动器
• AM26LV31E - 具有 +/-15kV IEC ESD 保护的低电压高速四路差动线路驱动器
• TPS2505 - 具有升压转换器和 LDO 的集成双路 USB 电源开关
• SN75463 - 双路高电压大电流外设驱动器
• LM95245 - 采用 TruTherm 技术且具有 SMBus 接口的 ±2°C 远程和本地温度传感器
• ADS1282 - 用于地震监测和能源开发的具有 PGA 的超高分辨率 Σ-Δ ADC