The ’HC393 devices contain eight flip-flops and additional gating to implement two individual 4-bit counters in a single package. These devices comprise two independent 4-bit binary counters, each having a clear (CLR) and a clock (CLK) input. N-bit binary counters can be implemented with each package, providing the capability of divide by 256. The ’HC393 devices have parallel outputs from each counter stage so that any submultiple of the input count frequency is available for system timing signals.

• Wide Operating Voltage Range of 2 V to 6 V
• Outputs Can Drive Up To 10 LSTTL Loads
• Low Power Consumption, 80-µA Max ICC
• Typical tpd = 13 ns
• ±4-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Dual 4-Bit Binary Counters With Individual Clocks
• Direct Clear for Each 4-Bit Counter
• Can Significantly Improve System Densities by Reducing Counter Package Count by 50 Percent

• SN74AC574 - 具有三态输出的八路 D 类边沿触发器
• TPS61012 - 具有固定 1.8V 输出的低输入电压同步升压转换器
• SN75114 - 双路差动线路驱动器
• CDCM61004 - 1:4 超低抖动晶体时钟发生器
• SN5430 - 8 输入正与非门
• AM3894 - Sitara 处理器
• UC2714M - 辅助开关 FET 驱动器
• LMZ14201H - 1A SIMPLE SWITCHER Power Module for High Output Voltage
• CSD19537Q3 - CSD19537Q3，100V N 沟道 NexFET(TM) 功率 MOSFET
• SN74ALS37A - 四路 2 输入正与非缓冲器