These monolithic circuits are synchronous reversible (up/down) counters having a complexity of 55 equivalent gates. The '192 and 'LS192 circuits are BCD counters and the '193 and 'LS193 are 4-bit binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidently with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes which are normally associated with asynchronous (ripple-clock) counters.

The outputs of the four master-slave flip-flops are triggered by a low-to-high-level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is high.

All four counters are fully programmable; that is, each output may be preset to either level by entering the desired data at the data inputs while the load input is low. The output will change to agree with the data inputs independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.

A clear input has been provided which forces all outputs to the low level when a high level is applied. The clear function is independent of the count and load inputs. The clear, count, and load inputs are buffered to lower the drive requirements. This reduces the number of clock drivers etc., required for long words.

These counters are designed to be cascaded without the need for external circuitry. Both borrow and carry outputs are available to cascade both the up- and down-counting functions. The borrow output produces a pulse equal in width to the count-down input when the counter underflows. Similarly, the carry output produces a pulse equal in width to the count-up input when an overflow condition exists. The counters can then be easily cascaded by feeding the borrow and carry outputs to the count-down and count-up inputs respectively of the succeeding counter.

• Cascading Circuitry Provided Internally
• Synchronous Operation
• Individual Preset to Each Flip-Flop
• Fully Independent Clear Input

• SN74AVC4T245-Q1 - 具有可配置电压转换和 3 态输出的汽车类 4 位双电源总线收发器
• TPS75615 - 单输出 LDO、5.0A、固定电压 (1.5V)、低静态电流、快速瞬态响应
• SN74ACT2226 - 64 x 1 x 2 双独立同步 FIFO 存储器
• TPS22924B - 具有快速输出放电功能的 3.6V，2A，18.3mΩ 负载开关
• LM4990 - 2 Watt Audio Power Amplifier with Selectable Shutdown Logic Level
• TM4C129XNCZAD - Tiva C 系列微控制器
• LP2951-50 - Fixed/Adjustable 5V Micropower Voltage Regulator with Shutdown
• VSP5612 - 16 位 70MSPS 4 通道成像模拟前端
• TPS61177A - TPS61177A 用于笔记本和平板电脑显示屏的 WLED 驱动器
• TLV62080 - 采用 2x2mm SON 封装的 1.2A 高效降压转换器