TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> SN74LVC32374A
SN74LVC32374A技术文档下载:
SN74LVC32374A技术文档产品手册下载
SN74LVC32374A - 产品图解:
None
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - SN74LVC32374A介绍
SN74LVC32374A - 32 位边沿 D 类触发器

SN74LVC32374A是TI公司的一款D类触发器产品,SN74LVC32374A是32 位边沿 D 类触发器,本页介绍了SN74LVC32374A的产品说明、应用、特性等,并给出了与SN74LVC32374A相关的TI元器件型号供参考。

SN74LVC32374A - 32 位边沿 D 类触发器 - D类触发器 - 触发器/锁存器/寄存器 - TI公司(Texas Instruments,德州仪器)

产品描述

This 32-bit edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC32374A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as four 8-bit flip-flops, two 16-bit flip-flops, or one 32-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

OE\ does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

产品特性

  • Member of the Texas Instruments Widebus™ Family
  • Operates from 1.65V to 3.6V
  • Inputs Accept Voltages to 5.5V
  • Max tpd of 4.5 ns at 3.3V
  • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
  • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
  • Ioff Supports Partial-Power-Down Mode Operation
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input and Output Voltages With 3.3-V VCC)
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.

下面可能是您感兴趣的TI公司D类触发器元器件
  • CSD87353Q5D - 30V 同步降压 NexFET? 电源块
  • TLC5947 - 24-Channel, 12-Bit PWM LED Driver with Internal Oscillator
  • SN54S174 - 具有清零功能的六路 D 类触发器
  • CD74HC253 - 高速 CMOS 逻辑双路 4 输入多路复用器
  • ADC07D1520 - ADC07D1520 低功耗 7 位双路 1.5 GSPS 或单路 3.0 GSPS 模数转换器
  • LMH0040 - 具有 LVDS 接口的 HD、SD、DVB-ASI SDI 串行器和驱动器
  • LMP8278Q-Q1 - LMP8278Q 高模式 14 x 增益精密感应放大器
  • CC3100 - CC3100 SimpleLink Wi-Fi 和片上因特网解决方案,用于 MCU 应用
  • INA216 - 5V、低功耗、高侧、零漂移、电压输出电流分流监控器,采用 WCSP 或 QFN 封装
  • TRF370317 - 0.4GHz 至 4.0GHz 正交调制器,1.7V 共模电压
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购