The TL5001A incorporates on a single monolithic chip all the functions required for a pulse-width-modulation (PWM) control circuit. Designed primarily for power-supply control, the TL5001A contains an error amplifier, a regulator, an oscillator, a PWM comparator with a dead-time-control input, undervoltage lockout (UVLO), short-circuit protection (SCP), and an open-collector output transistor. The TL5001A has a typical reference voltage tolerance of ±3%.

The error-amplifier common-mode voltage ranges from 0 V to 1.5 V. The noninverting input of the error amplifier is connected to a 1-V reference. Dead-time control (DTC) can be set to provide 0% to 100% dead time by connecting an external resistor between DTC and GND. The oscillator frequency is set by terminating RT with an external resistor to GND. During low VCC conditions, the UVLO circuit turns the output off until VCC recovers to its normal operating range.

The TL5001A is characterized for operation from –40°C to 125°C.

• Qualified for Automotive Applications
• Complete PWM Power Control
• 3.6-V to 40-V Operation
• Internal Undervoltage-Lockout Circuit
• Internal Short-Circuit Protection
• Oscillator Frequency: 20 kHz to 500 kHz
• Variable Dead Time Provides Control Over Total Range
• ±3% Tolerance on Reference Voltage
• Available in Q-Temperature Automotive
  • High-Reliability Automotive Applications
  • Configuration Control/Print Support
  • Qualification to Automotive Standards

• SN74ALVC00 - 四路 2 输入正与非门
• TPS650061 - 采用 2.25MHz 降压转换器且具有双路 LDO 和 SVS 的电源管理 IC (PMIC)
• TLV7111518D - 双通道、200mA 输出、低噪声、高 PSRR、低压降稳压器，具有有源下拉功能
• TPS56428 - 具有 D-CAP2 模式和自动跳过 ECO-Mode 的 4.5V 至 18V 输入、4A 同步降压 转换器
• TPS3801L30 - 处理器监控电路
• SN74HC253-Q1 - 具有三态输出的汽车类双路 4 线路至 1 线路数据选择器/多路复用器
• ADC121S051 - 单通道、200 至 500 ksps、12 位 A/D 转换器
• SN54HC139-SP - 双路 2 线路至 4 线路解码器/多路解复用器
• CD54ACT164 - 8 位串行输入/并行输出移位寄存器
• SN74LV20A - 双路 4 输入正与非门