TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> TPA2000D1-Q1
TPA2000D1-Q1技术文档下载:
TPA2000D1-Q1技术文档产品手册下载
TPA2000D1-Q1 - 产品图解:
TPA2000D1-Q1-汽车类单声道免滤波 D 类音频放大器
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - TPA2000D1-Q1介绍
TPA2000D1-Q1 - 汽车类单声道免滤波 D 类音频放大器

TPA2000D1-Q1是TI公司的一款扬声器放大器(AB类/D类)产品,TPA2000D1-Q1是汽车类单声道免滤波 D 类音频放大器,本页介绍了TPA2000D1-Q1的产品说明、应用、特性等,并给出了与TPA2000D1-Q1相关的TI元器件型号供参考。

TPA2000D1-Q1 - 汽车类单声道免滤波 D 类音频放大器 - 扬声器放大器(AB类/D类) - 低功耗放大器 - TI公司(Texas Instruments,德州仪器)

产品描述
产品特性

  • Qualified for Automotive Applications
  • ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
  • Modulation Scheme Optimized to Operate Without a Filter
  • Extremely Efficient Third-Generation 5-V Class-D Technology:
    • Low Supply Current (No Filter) . . . 4 mA
    • Low Supply Current (Filter) . . . 7.5 mA
    • Low Shutdown Current . . . 0.05 µA
    • Low-Noise Floor . . . 40 µVRMS (No-Weighting Filter)
    • Maximum Efficiency Into 8 Ω, 75 — 85%
    • Four Internal Gain Settings . . . 6 — 23.5 dB
    • PSSR . . . –77 dB
  • 4 mm × 4 mm MicroStar™ Junior BGA and TSSOP Package Options
  • 2 W Into a 4-Ω Speaker (THD+N<1%)
  • <0.2% THD+N at 1.5 W, 1 kHz, Into a 4-Ω Load
  • Integrated Depop Circuitry
  • Short-Circuit Protection (Short to PVDD, Ground, and Load)

MicroStar is a trademark of Texas Instruments.

DESCRIPTION/ORDERING INFORMATION

The TPA2000D1 is a 2-W mono bridge-tied-load (BTL) class-D amplifier designed to drive a speaker with at least 4-Ω impedance. The amplifier uses Texas Instruments third-generation modulation technique, which results in improved efficiency and SNR. It also allows the device to be connected directly to the speaker without the use of the LC output filter commonly associated with class-D amplifiers (this results in EMI which must be shielded at the system level). These features make the device ideal for use in devices where high efficiency is needed to extend battery run time.

The gain of the amplifier is controlled by two input terminals, GAIN1 and GAIN0. This allows the amplifier to be configured for a gain of 6, 12, 18, and 23.5 dB. The differential input terminals are high-impedance CMOS inputs and can be used as summing nodes.

The class-D BTL amplifier includes depop circuitry to reduce the amount of turnon pop at power up and when cycling SHUTDOWN.

The TPA2000D1 is available in the 16-pin TSSOP and MicroStar™ Junior BGA packages and drive 2 W of continuous output power into a 4-Ω load. The TPA2000D1T operates over an ambient temperature range of –40°C to 105°C.

下面可能是您感兴趣的TI公司扬声器放大器(AB类/D类)元器件
  • TPD4S010 - 用于高速差分接口的 4 通道 ESD 解决方案
  • TPS65162 - 具有输入到输出集成隔离开关、2 个运算放大器和 GPM 的 4 通道 LCD 偏置
  • ADS1100 - 自校准 16 位模数转换器
  • LM5134 - 具有备用导频输出的单个 7.6A 峰值电流低侧栅极驱动器
  • TPS3808G18 - 低静态电流可编程延迟监控电路
  • TPS55065-Q1 - 汽车类 0.5A 降压/升压开关模式稳压器
  • LMX2502 - Frequency Synthesizer System with Integrated VCOs
  • SN74HC27 - 三路 3 输入正或非门
  • TPS22942 - 5.5V,0.2A,400mΩ,100mA 限流低电平有效负载开关
  • SN74AUP1T02 - 低功耗、1.8/2.5/3.3V 输入、3.3V CMOS 输出、单路 2 输入正或非门
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购