

- PTH12020LAG - 板安装电源 > 直流转换器
- TAS5805MPWP - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- LMC6061IM/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74BCT640DWRG4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TRS202CDRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM4050CIM3X-2.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- TPA741DGNR - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- CC1000PPK-868 - 射频评估和开发套件,开发板
- ADS62P22EVM - 开发板,套件,编程器 > 评估板 > 模数转换器(ADC)评估板
- LM4140BCMX-1.0 - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- ADC0834CCWM/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- 74AC16373DL - 集成电路(IC) > 逻辑 > 锁存器
- DV2004S1 - 评估和演示板及套件
- TPS7B8333QDCYRQ1M3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM2936Z-5.0/LFT3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TRF3762EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- LM35DMX - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- OPA2344UA - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- ADC081S101CISDX/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TPS23753AEVM-004 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件



TPS2141 - 用于高功率 USB 外设、具有双路限流的可调节 LDO Plus 5V 开关
TPS2141是TI德州仪器公司的一款含LDO的开关产品,TPS2141是用于高功率 USB 外设、具有双路限流的可调节 LDO Plus 5V 开关,本站介绍了TPS2141的封装应用图解、特点和优点、功能等,并给出了与TPS2141相关的TI元器件型号供参考。
TPS2141 - 用于高功率 USB 外设、具有双路限流的可调节 LDO Plus 5V 开关 - 含LDO的开关 - USB电源和充电端口控制器 - 德州仪器
The TPS2140/41/50/51 is a USB 1.0 and 2.0 Specification-compatible IC containing a dual-current-limiting power switch and an adjustable low dropout regulator (LDO). Both the switch and LDO limit inrush current by controlling the turnon slew rate. The unique dual-current-limiting feature of the switch allows USB peripherals to utilize high-value capacitance at the output of the switch, while keeping the inrush current low. During turn on, the switch limits the current delivered to the capacitive load to less than 100 mA. When the output voltage from the switch reaches about 93% of the input voltage, the switch power good output goes high, and the switch current limit increases to 800mA (minimum), at which point higher current loads can be turned on. The higher current limit provides short circuit protection while allowing the peripheral to draw maximum current from the USB bus.
The switch and LDO function independently, providing flexibility in DSP applications requiring separate core and I/O voltages. For example, in a DSP application operating from a 3.3-V rail, the LDO can supply the DSP core voltage down to 0.9 V, while the switch powers the 3.3-V (typical) DSP I/O supply. If supply sequencing is required, the LDO power good output can be used to enable the switch.
- Complete Power Management Solution for USB High-Power Peripherals
- 250 mA Low-Dropout Regulator (LDO) With Enable and 325 mA (Typ) Current Limit
- LDO Supports 2.7 V to 5.5 V VIN and 0.9 V to 3.3 V Adjustable VOUT
- 40 m (Typ) High-Side MOSFET With Dual Current Limit
- Undervoltage Lockout and Power Good for LDO and Switch
- CMOS- and TTL-Compatible Enable Inputs
- 85 µA (Typ) Supply Current
- 5 µA (Typ) Standby Supply Current
- Available in 14-Pin HTSSOP (PowerPAD)
- 40°C to 85°C Ambient Temperature Range
- Alternative to TPS2148/58 3.3-V LDO With 3.3-V Switch and 5-V Switch
- APPLICATIONS
- High-Power USB Peripherals
- ADSL Modems
- Digital Still and PC Cameras
- Zip Drives
- Speakers
- DSP Sequencing
- High-Power USB Peripherals
PowerPAD is a trademark of Texas Instruments. USB is a trademark of Universal Serial Bus Association.
- CD74AC02 - 四路 2 输入或非门
- TIR1000 - 独立 IrDA 编码器,解码器
- SN54LS38 - 具有集电极开路输出的四路 2 输入正与非缓冲器
- PCM1861 - 单端 2Vrms 模拟输入、24位 192 kHz 立体声 ADC
- UC3872 - 谐振灯镇流器控制器
- TPS51221 - 固定频率 99% 占空比峰值电流模式笔记本系统功率双路控制器
- TPS2064C - 双通道限流配电开关
- TPS2592AA - 具有集成阻断 FET 驱动器的 12V 熔丝
- TPS54312 - 具有 1.2V 输出的低输入电压 3A 同步降压转换器
- UCC1802 - 低功耗 BiCMOS 电流模式 PWM



