• Input Operating Voltage Range: 3 V to 20 V
• PMBus Enabled Analog Controller
• Reference 600 mV ± 1%
• Remote Voltage Sense Amplifier
• Internal 6-V Regulator and 6-V Gate Drive
• Programmable Overcurrent Protection
• Inductor Resistance or Series Resistance Used for Current Sensing
• Programmable Switching Frequency: 200 kHz to 2 MHz
• Powergood Indicator
• Thermal Shutdown
• Programmable Soft-Start
• Internal Bootstrap Diode
• Prebias Output Safe
• 24-Pin QFN Package

• Smart Power Systems
• Power Supply Modules
• Communications Equipment
• Computing Equipment

The TPS40400 is a cost-optimized flexible synchronous buck controller that operates from a nominal 3-V to 20-V supply. This controller is an analog PWM controller that allows programming and monitoring through the PMBus™ interface. Flexible features found on this device include programmable soft-start time, programmable short circuit limit, and programmable undervoltage lockout (UVLO).

An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs. Gate drive voltage is 6 V to better enhance the power FETs for reduced losses. Short circuit detection occurs by sensing the voltage drop across the inductor or across a resistor placed in series with the inductor. A PMBus programmable threshold is compared to this voltage and is used to detect overcurrent. When the overcurrent threshold is reached, a pulse by pulse current limit scheme is used to limit the current to acceptable levels. If the overcurrent condition persists for more than 7 clock cycles of the converter, a fault condition is declared and the converter shuts down and goes into either a hiccup restart mode or latches off. The behavior can be selected through the PMBus interface. Other PMBus interface features include programmable operating frequency, soft-start time, overvoltage and undervoltage thresholds and the response to those events, output voltage change including margining as well as status monitoring.