TXB0106-Q1是TI公司的一款双向电压转换产品，TXB0106-Q1是具有自动方向感应的汽车类 6 位双向电压电平转换器，本页介绍了TXB0106-Q1的产品说明、应用、特性等，并给出了与TXB0106-Q1相关的TI元器件型号供参考。
TXB0106-Q1 - 具有自动方向感应的汽车类 6 位双向电压电平转换器 - 双向电压转换 - 电压电平转换 - TI公司（Texas Instruments，德州仪器）
- Qualified for Automotive Applications
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port (VCCA≤ VCCB)
- VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State
- OE Input Circuit Referenced to VCCA
- Ioff Supports Partial-Power-Down Mode Operation
- ESD Protection Exceeds AEC-Q100
- A Port
- 2000-V Human-Body Model
- 1500-V Charged-Device Model
- B Port
- ±10-kV Human-Body Model
- 1500-V Charged-Device Model
- A Port
DESCRIPTION/ORDERING INFORMATION
This 6-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXB0106 is designed so that the OE input circuit is supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
