


- 5962-9751102QPA - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74LS37N - 集成电路(IC) > 逻辑 > 门和反相器
- SN74LS109ANSR - 集成电路(IC) > 逻辑 > 触发器
- SN74CBTLV3384DWR - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- LM2674LD-3.3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM675T/LF05 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MSP430F5218IRGCT - 嵌入式 - 微控制器
- ISO7331FCDWR - 隔离器 > 数字隔离器
- TLV2316IDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP2966IMMX-3336 - 电源管理IC - 稳压器 - 线性
- TS5A23159DGSTG4 - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- SN74HC253NG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- SN74BCT244NG4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TMS320R2812GHHQ - 集成电路(IC) > 嵌入式 > 微控制器
- CDC6CE027000ADLFR - 晶体,振荡器,谐振器 > 振荡器
- THS6012IGQER - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM3704YCMMX-232 - 电源管理IC - 监控器
- UC3705D - 集成电路(IC) > 电源管理(PMIC) > 栅极驱动器
- PTH03020WAS - 板安装电源 > 直流转换器
- TL2575HV-15IKV - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



ADC128S102 - 8 通道、500 ksps 至 1 ksps、12 位 A/D 转换器
ADC128S102是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADC128S102是8 通道、500 ksps 至 1 ksps、12 位 A/D 转换器,本站介绍了ADC128S102的封装应用图解、特点和优点、功能等,并给出了与ADC128S102相关的TI元器件型号供参考。
ADC128S102 - 8 通道、500 ksps 至 1 ksps、12 位 A/D 转换器 - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
- Eight Input Channels
- Variable Power Management
- Independent Analog and Digital Supplies
- SPI/QSPI™/MICROWIRE™/DSP Compatible
- Packaged in 16-Lead TSSOP
- Key Specifications
- Conversion Rate 500 ksps to 1 MSPS
- DNL (VA = VD = 5.0 V) +1.5 / −0.9
- LSB (maximum) INL (VA = VD = 5.0 V) ±1.2 LSB (maximum)
- Power Consumption
- 3V Supply 2.3 mW (typical)
- 5V Supply 10.7 mW (typical)
- Automotive Navigation
- Portable Systems
- Medical Instruments
- Mobile Communications
- Instrumentation and Control Systems
The ADC128S102 is a low-power, eight-channel CMOS 12-bit analog-to-digital converter specified for conversion throughput rates of 500 ksps to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to eight input signals at inputs IN0 through IN7.
The output serial data is straight binary and is compatible with several standards, such as SPI, QSPI, MICROWIRE, and many common DSP serial interfaces.
The ADC128S102 may be operated with independent analog and digital supplies. The analog supply (VA) can range from +2.7 V to +5.25 V, and the digital supply (VD) can range from +2.7 V to VA. Normal power consumption using a +3-V or +5-V supply is 2.3 mW and 10.7 mW, respectively. The power-down feature reduces the power consumption to 0.06 µW using a +3-V supply and 0.25 µW using a +5-V supply.
The ADC128S102 is packaged in a 16-lead TSSOP package. Operation over the extended industrial temperature range of −40°C to +105°C is ensured.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| ADC128S102 | TSSOP (16) | 5.00 mm x 4.40 mm |
- TPS73250-Q1 - 具有反向电流保护的无电容、NMOS、250mA 低压降稳压器
- TAS5711 - 具有扬声器均衡、DRC 和 2.1 支持的 20W 立体声 I2S 音频放大器
- TPS650732 - 采用 6mm x 6mm QFN 封装的 5 通道电源管理 IC (PMIC),具有 3 个 DC/DC 和 2 个 LDO
- UCC2813-3 - 低功耗经济型 BiCMOS 电流模式 PWM
- DS26C31MQML - CMOS Quad TRI STATE Differential Line Drivers
- TPS2140 - 用于高功率 USB 外设、具有双路电流限制的可调节 LDO Plus 3.3V 开关
- DAC121C085 - 具有 I2C 兼容接口和外部参考的 12 位微功耗 DAC
- CD4051B - 具有逻辑电平转换功能的 CMOS 单路 8 通道模拟多路复用器/多路解复用器
- UC282-2 - 单输出 LDO、3.0A、固定电压 (2.1V)、快速瞬态响应、低静态电流
- MSP430FG4260 - 16 位超低功耗 MCU,具有 24kB 闪存、256B RAM、16 位 Σ-Δ A/D、12 位 D/A、2 个运算放大器和 LCD 驱动器



