


- ADC32RF83IRMPT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TPS3809K33DBVRG4 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- LM3S817-IQN50-C2T - 集成电路(IC) > 嵌入式 > 微控制器
- CC2650F128RSMT - 射频和无线 > 射频收发器 IC
- TLV5632IPWR - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- TPS72725DSER - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP38859S-1.2/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DP83640TVV - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TPS3840PL48DBVR - 集成电路(IC) > 电源管理(PMIC) > 监控器
- LM2735YMF/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- CY74FCT16245ATPVC - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM2902PWRG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP3855ESX-ADJ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DRV8363QRGZRQ1 - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- ADS1259BIPW - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- ADS8584SIPM - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- ADS8887IDGS - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- VSP2230Y/2K - 线性 - 视频处理
- V62/04756-01XE - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- TLV2262IDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器



CDCE913 - 具有 2.5V 或 3.3V LVCMOS 输出的可编程 1-PLL VCXO 时钟合成器
CDCE913是TI德州仪器公司的一款通用产品,CDCE913是具有 2.5V 或 3.3V LVCMOS 输出的可编程 1-PLL VCXO 时钟合成器,本站介绍了CDCE913的封装应用图解、特点和优点、功能等,并给出了与CDCE913相关的TI元器件型号供参考。
CDCE913 - 具有 2.5V 或 3.3V LVCMOS 输出的可编程 1-PLL VCXO 时钟合成器 - 通用 - 时钟发生器 - 德州仪器
- Member of Programmable Clock Generator Family
- CDCE913/CDCEL913: 1-PLL, 3 Outputs
- CDCE925/CDCEL925: 2-PLL, 5 Outputs
- CDCE937/CDCEL937: 3-PLL, 7 Outputs
- CDCE949/CDCEL949: 4-PLL, 9 Outputs
- In-System Programmability and EEPROM
- Serial Programmable Volatile Register
- Nonvolatile EEPROM to Store Customer Settings
- Flexible Input Clocking Concept
- External Crystal: 8 MHz to 32 MHz
- On-Chip VCXO: Pull Range ±150 ppm
- Single-Ended LVCMOS up to 160 MHz
- Free Selectable Output Frequency up to 230 MHz
- Low-Noise PLL Core
- PLL Loop Filter Components Integrated
- Low Period Jitter (Typical 50 ps)
- Separate Output Supply Pins
- CDCE913: 3.3 V and 2.5 V
- CDCEL913: 1.8 V
- Flexible Clock Driver
- Three User-Definable Control Inputs [S0/S1/S2], for Example, SSC Selection, Frequency Switching, Output Enable, or Power Down
- Generates Highly Accurate Clocks for Video, Audio, USB, IEEE1394, RFID, Bluetooth®, WLAN, Ethernet, and GPS
- Generates Common Clock Frequencies Used With TI-DaVinci™, OMAP™, DSPs
- Programmable SSC Modulation
- Enables 0-PPM Clock Generation
- 1.8-V Device Power Supply
- Wide Temperature Range –40°C to 85°C
- Packaged in TSSOP
- Development and Programming Kit for Easy PLL Design and Programming (TI Pro-Clock™)
D-TVs, STBs, IP-STBs, DVD Players, DVD Recorders, and Printers
The CDCE913 and CDCEL913 devices are modular PLL-based, low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.
The CDCx913 has separate output supply pins, VDDOUT, which is 1.8V for CDCEL913 and 2.5V to 3.3V for CDCE913.
The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.
The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.
The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface.
The CDCx913 operates in a 1.8-V environment. It operates in a temperature range of –40°C to 85°C.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| CDCE913 CDCEL913 | TSSOP (14) | 5.00 mm × 4.40 mm |
- PCM1795 - 32 位 192kHz 采样高级分段音频立体声 DAC
- SN74CB3Q16811 - 具有预充电输出的 24 位 FET 开关,2.5V/3.3V 低压高带宽总线开关
- MC79L05A - 3/8 引脚 100mA 固定 (-5V) 负电压稳压器
- SN74AUP1G14 - 低功耗单路施密特触发反向器
- CD74HCT138 - 高速 CMOS 逻辑 3 至 8 线路解码器/多路解复用器(反向和同向)
- SN74LV175A - 具有清零功能的四路 D 类触发器
- DRV603 - 具有差动输入的 3Vrm DirectPath? 无杂声可变输入增益线路驱动器
- LM53600-Q1 - LM5360x-Q1 面向 1000mA 空间受限类应用的同步降压稳压器
- SN75C185 - 低功耗多路驱动器和接收器
- SN74AVC4T234 - 具有可配置电压转换的 4 位双电源总线收发器



