DS90UR910-Q1是TI公司的一款FPD-LinkII串行器/解串器产品，DS90UR910-Q1是10 - 75 MHz、24 位彩色 FPD 链接 II 至 CSI-2 转换器，本页介绍了DS90UR910-Q1的产品说明、应用、特性等，并给出了与DS90UR910-Q1相关的TI元器件型号供参考。
DS90UR910-Q1 - 10 - 75 MHz、24 位彩色 FPD 链接 II 至 CSI-2 转换器 - FPD-LinkII串行器/解串器 - 显示和成像串行器/解串器 - TI公司（Texas Instruments，德州仪器）
The DS90UR910Q is an interface bridge chip that recovers data from the FPD-Link II serial bit stream and converts into a Camera Serial Interface (CSI-2) format compatible with Mobile Industry Processor Interface (MIPI) specifications. It recovers the 24- or 18-bit RGB data and 3 video sync-signals from the serial bit stream compatible to FPD-Link II serializers. The recovered data is packetized and serialized over two data lanes strobed by a half-rate serial clock compliant with the MIPI DPHY / CSI-2 specifications, each running up to 900 Mbps. The FPD-Link II receiver supports pixel clocks of up to 75 MHz. The CSI-2 output serial bus greatly reduces the interconnect and signal count to a graphic processing unit (GPU) and eases system designs for video streams from multiple automotive driver assist cameras.
The DS90UR910Q is available in a 40-lead WQFN package. Electrical performance is qualified for automotive AEC-Q100 grade 2 temperature range -40°C to +105°C.
- 10 –75 MHz PCLK Support (280 Mbps – 2.10 Gbps FPD-Link II Linerate)
- Compatible to DC Balanced, AC Coupled for FPD-Link II Serial Bit Stream
- Capable to Recover Data up to 10 Meters STP Cable
- MIPI D-PHY Modules Conform to v1.00.00
- Compatible with MIPI CSI-2 Version 1.01
- Supports Data Rate up to 900Mbps per Data Lane, with Two Lanes
- Video Stream Packet Formats: RGB888
- Continuous and Non-Continuous Clocking Mode
- Ultra Low Power, Escape, High Speed, and Control Modes Support
- Integrated Input Terminations and Adjustable Receive Equalization
- Fast Random Lock; No Reference Clock Required
- CCI/I2C Compatible Control Bus
- @Speed BIST and Reporting Pin
- Single +1.8V Power Supply
- 1.8V or 3.3V Compatible LVCMOS I/O Interface
- Automotive Grade Product: AEC-Q100 Grade 2 Qualified
- 8 kV ISO 10605 ESD Rating
- Lead-less WQFN-40 Package (6mm x 6mm)
