

- INA193AQDBVRQ1 - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- TPS3103E15DBVR - 集成电路(IC) > 电源管理(PMIC) > 监控器
- P82B96DG4 - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- TPS274160EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- ALM2402QPWPRQ1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TMUX6212PWR - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- TRS211IDWRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- ADC0838CCN/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- OPA2607H - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS2216ADBRG4 - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- SN74LVTH125PWRE4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- CDCE949PWG4 - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- UCC3580D-3 - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- LP5551SQ/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- SN74AUP1G240DPWR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM324ADRG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM6172IMX - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- OPA593EVM - 开发板,套件,编程器 > 评估板 > 运算放大器评估板
- LP2989AIMMX-5.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM431ACM3X - 集成电路(IC) > 电源管理(PMIC) > 电压基准



ISO7240CF-Q1 - 汽车类四通道 4/0.25Mbps 数字隔离器,可选故障保护
ISO7240CF-Q1是TI德州仪器公司的一款无产品,ISO7240CF-Q1是汽车类四通道 4/0.25Mbps 数字隔离器,可选故障保护,本站介绍了ISO7240CF-Q1的封装应用图解、特点和优点、功能等,并给出了与ISO7240CF-Q1相关的TI元器件型号供参考。
ISO7240CF-Q1 - 汽车类四通道 4/0.25Mbps 数字隔离器,可选故障保护 - 无 - 数字隔离器 - 德州仪器
The ISO7240, ISO7241 and ISO7242 are quad-channel digital isolators with multiple channel configurations and output enable functions. These devices have logic input and output buffers separated by TI’s silicon dioxide (SiO2) isolation barrier. Used in conjunction with isolated power supplies, these devices block high voltage, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.
The ISO7240 has all four channels in the same direction while the ISO7241 has three channels the same direction and one channel in opposition. The ISO7242 has two channels in each direction.
The C option devices have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device. The M option devices have CMOS VCC/2 input thresholds and do not have the input noise-filter or the additional propagation delay.
The ISO7240CF has an input disable function on pin 7, and a selectable high or low failsafe-output function with the CTRL pin (pin 10). The failsafe-output is a logic high when a logic-high is placed on the CTRL pin or it is left unconnected. If a logic-low signal is applied to the CTRL pin, the failsafe-output becomes a logic-low output state. The ISO7240CF input disable function prevents data from being passed across the isolation barrier to the output. When the inputs are disabled, the outputs are set by the CTRL pin.
These devices may be powered from either 3.3-V or 5-V supplies on either side in any 3.3-V / 3.3-V, 5-V / 5-V, 5-V / 3.3-V, or 3.3-V / 5-V combination. Note that the signal input pins are 5-V tolerant regardless of the voltage supply level being used.
These devices are characterized for operation over the ambient temperature range of –40°C to 125°C.
- Qualified for Automotive Applications
- Selectable Failsafe Output (ISO7240CF)
- 25 and 150-Mbps Signaling Rate Options
- Low Channel-to-Channel Output Skew; 1 ns Max
- Low Pulse-Width Distortion (PWD); 2 ns Max
- Low Jitter Content; 1 ns Typ at 150 Mbps
- Typical 25-Year Life at Rated Working Voltage (see application note SLLA197 and )
- 4000-Vpeak Isolation, 560-Vpeak VIORM
- UL 1577 , IEC 60747-5-2 (VDE 0884, Rev 2), IEC 61010-1, IEC 60950-1 and CSA Approved
- 4 kV ESD Protection
- Operate With 3.3-V or 5-V Supplies
- High Electromagnetic Immunity (see application report SLLA181)
- –40°C to 125°C Operating Range
- LM4040D82 - 8.192V 精密微功耗并联电压参考,1% 精确度
- DS90LV031AQML - 3V LVDS Quad CMOS Differential Line Driver
- SN54AC86 - 四路 2 输入异或门
- CD54HCT123 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器
- ADS1263 - 具有 PGA、内部参考和辅助 ADC 的高分辨率、32 位、38 kSPS ADC
- CSD17570Q5B - 30V,N 通道 NexFET 功率 MOSFET,CSD17570Q5B
- SN74GTLP1394 - 具有独立 LVTTL 端口、反馈路径和可选择极性的 2 位 LVTTL 到 GTLP 可调节边沿速率总线 Xcvrs
- SN74LVC1G139 - 2 线路至 4 线路解码器
- PTH12060L - 0.8 至 1.8V 10A 输出 12V 输入的非隔离宽调节模块
- AFE0256 - 用于平板数字 X 射线探测器的 256 通道模拟前端



