• Improved Drop-in Replacement for the TJA1040
• ±12 kV ESD Protection
• Low-Current Standby Mode With Bus Wakeup: 5 μA Typical
• Bus-Fault Protection of –27 V to 40 V
• Rugged Split-Pin Bus Stability
• Dominant Time-Out Function
• Power-Up/Down Glitch-Free Bus Inputs and Outputs
  • High Input Impedance With Low VCC
  • Monotonic Outputs During Power Cycling
• DeviceNet™ Vendor ID Number 806

• CAN Bus Applications
• Battery-Operated Applications
• Hand-Held Diagnostics
• Medical Scanning and Imaging
• HVAC
• Security Systems
• Telecom Base Station Status and Control
• SAE J1939 Standard Data Bus Interface
• NMEA 2000 Standard Data Bus Interface
• ISO 11783 Standard Data Bus Interface
• Industrial Automation
  • DeviceNet Data Buses

The SN65HVD1040 meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a Controller Area Network (CAN). As a CAN bus transceiver, the SN65HVD1040 device provides differential transmit and receive capability for a CAN controller at signaling rates of up to 1 Mbps(1). (1) The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

Designed for operation in especially harsh environments, the device features ±12 kV ESD protection on the bus and split pins, cross-wire, overvoltage and loss of ground protection from –27 V to 40 V, overtemperature shutdown, a –12 V to 12 V common-mode range, and will withstanding voltage transients from –200 V to 200 V according to ISO 7637.