SN74HC112是TI公司的一款J-K触发器产品，SN74HC112是具有清零和预设功能的双路 J-K 下降沿触发器，本页介绍了SN74HC112的产品说明、应用、特性等，并给出了与SN74HC112相关的TI元器件型号供参考。
SN74HC112 - 具有清零和预设功能的双路 J-K 下降沿触发器 - J-K触发器 - 触发器/锁存器/寄存器 - TI公司（Texas Instruments，德州仪器）
The ’HC112 devices contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE)\ or clear (CLR)\ inputs sets or resets the outputs, regardless of the levels of the other inputs. When (PRE)\ and (CLR)\ are inactive (high), data at the J and K inputs meeting the setup time requirements are transferred to the outputs on the negative-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the fall time of the CLK pulse. Following the hold-time interval, data at the J and K inputs may be changed without affecting the levels at the outputs. These versatile flip-flops perform as toggle flip-flops by tying J and K high.
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up To 10 LSTTL Loads
- Low Power Consumption, 40-µA Max ICC
- Typical tpd = 13 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1 µA Max
