SN75161B - 八路通用接口总线收发器

SN75161B是TI德州仪器公司的一款其它线电路产品，SN75161B是八路通用接口总线收发器，本站介绍了SN75161B的封装应用图解、特点和优点、功能等，并给出了与SN75161B相关的TI元器件型号供参考。

SN75161B - 八路通用接口总线收发器 - 其它线电路 - 其它接口 - 德州仪器

产品描述

The SN75161B and SN75162B eight-channel, general-purpose interface bus transceivers are monolithic, high-speed, low-power Schottky devices designed to meet the requirements of IEEE Standard 488-1978. Each transceiver is designed to provide the bus-management and data-transfer signals between operating units of a single- or multiple-controller instrumentation system. When combined with the SN75160B octal bus transceiver, the SN75161B or SN75162B provides the complete 16-wire interface for the IEEE-488 bus.

The SN75161B and SN75162B feature eight driver-receiver pairs connected in a front-to-back configuration to form input/output (I/O) ports at both the bus and terminal sides. A power-up/-down disable circuit is included on all bus and receiver outputs. This provides glitch-free operation during VCC power up and power down.

The direction of data through these driver-receiver pairs is determined by the DC, TE, and SC (on SN75162B) enable signals. The SC input on the SN75162B allows the REN and IFC transceivers to be controlled independently.

The driver outputs (GPIB I/O ports) feature active bus-terminating resistor circuits designed to provide a high impedance to the bus when supply voltage VCC is 0. The drivers are designed to handle loads up to 48 mA of sink current. Each receiver features pnp transistor inputs for high input impedance and hysteresis of 400 mV for increased noise immunity. All receivers have 3-state outputs to present a high impedance to the terminal when disabled.

The SN75161B and SN75162B are characterized for operation from 0°C to 70°C.

H = high level, L = low level, R = receive, T = transmit, X = irrelevant Direction of data transmission is from the terminal side to the bus side, and the direction of data receiving is from the bus side to the terminal side. Data transfer is noninverting in both directions.

ATN is a normal transceiver channel that functions additionally as an internal direction control or talk enable for EOI whenever the DC and TE inputs are in the same state. When DC and TE are in opposite states, the ATN channel functions as an independent transceiver only.

产品特性

Meets IEEE Standard 488-1978 (GPIB)
8-Channel Bidirectional Transceivers
Power-Up/Power-Down Protection (Glitch Free)
Designed to Implement Control Bus Interface
SN75161B Designed for Single Controller
SN75162B Designed for Multiple Controllers
High-Speed, Low-Power Schottky Circuitry
Low Power Dissipation...72 mW Max Per Channel
Fast Propagation Times...22 ns Max
High-Impedance pnp Inputs
Receiver Hysteresis...650 mV Typ
Bus-Terminating Resistors Provided on Driver Outputs
No Loading of Bus When Device Is Powered Down (VCC = 0)

下面可能是您感兴趣的TI德州仪器公司其它线电路元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购