

- HPA00721DR - 电源管理IC - PFC(功率因数校正)
- LP3990SD-1.5 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- V62/03609-01XE - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- AMC7820Y/250G4 - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途
- TPS3306-20QDRG4Q1 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- ISO1042DWR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LP3855ES-5.0 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS61282AYFFT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- ADS9815RSHR - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- JD54F32SDA - 集成电路(IC) > 逻辑 > 门和反相器
- SN74HCS126DR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM5022QDGSTQ1 - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- PT3344A - 直流转换器
- TMS32C6415EZLZA5E0 - 集成电路(IC) > 嵌入式 > DSP(数字信号处理器)
- TRSF3223CDB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM3S5Y36-IQR80-C3T - 嵌入式 - 微控制器
- OPA4197IDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MM54HC126E/883 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DS92LV040ATLQA/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- CDCLVP1204RGTT - 集成电路(IC) > 时钟/定时 > 时钟缓冲器,驱动器



TPS60120 - 稳压 3.3V 高功率充电泵 DC/DC 转换器
TPS60120是TI德州仪器公司的一款电荷泵(无感应器)产品,TPS60120是稳压 3.3V 高功率充电泵 DC/DC 转换器,本站介绍了TPS60120的封装应用图解、特点和优点、功能等,并给出了与TPS60120相关的TI元器件型号供参考。
TPS60120 - 稳压 3.3V 高功率充电泵 DC/DC 转换器 - 电荷泵(无感应器) - DC/DC开关稳压器 - 德州仪器
The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They can deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).
- High Average Efficiency Over Input Voltage Range Because of Special Switching Topology
- Minimum 200-mA Output Current From an Input Voltage Range of 1.8-V to 3.6-V
- Regulated 3.3-V or 3-V ±4% Output Voltage
- No Inductors Required, Low EMI
- Only Four External Components Required
- 55-uA Quiescent Supply Current
- 0.05-uA Shutdown Current
- Load Disconnected in Shutdown
- Integrated Low Battery and Power Good Detectors
- Evaluation Module Available (TPS60120EVM-142)
- Applications
- Applications Powered by Two Battery Cells
- Portable Instruments
- Battery-Powered Microprocessor Systems
- Miniature Equipment
- Backup-Battery Boost Converters
- PDAs, Organizers, Laptops
- MP-3 Portable Audio Players
- Handheld Instrumentation
- Medical Instruments (e.g., Glucose Meters)
- Cordless Phones
PowerPAD is a trademark of Texas Instruments Incorporated.
- SN75DP139 - DisplayPort 至 TMDS 转换器
- TPS65301-Q1 - 汽车 3MHz 降压稳压器、三路线性稳压器、和受保护传感器电源
- TMDS261B - 2 选 1 HDMI 开关
- UC2524A - 高级稳压脉宽调制器
- ADS41B29 - 12 位 250MSPS 缓冲低功耗 ADC
- SN74LV574A - 具有三态输出的八路边沿 D 类触发器
- CD54ACT109 - 具有设置和复位功能的双路上升沿 J-K 触发器
- TM4C123BH6PM - Tiva C 系列微控制器
- UA78L10A - 3/8 引脚 100mA 固定 10V 正电压稳压器
- TMP75C - 采用工业标准 LM75 尺寸和引脚的 1.8V 数字温度传感器



